The P7-850W Platinum power supply belongs to Aerocool’s Project 7 series encompassing aesthetically coordinated PC components and which are ideally utilised in conjunction with one another. This Project 7 series power supply captivates with it stylish mesh casing, the RGB-LED lighting integrated into the 140 mm fan, the high 80Plus Platinum efficiency rating as well as its fully modular cabling.
THE AEROCOOL PROJECT 7 80PLUS PLATINUM NETZTEIL AT A GLANCE:
850 Watt total output with a powerful 70 A rail
140 mm fans with stylish RGB-LED lighting
6x 6+2-pin / 10x SATA / 6x 4-pin Molex
High efficiency thanks to 80Plus Platinum certification
HIGH-PERFORMANCE AEROCOOL PSU WITH FULLY MODULAR CABLE MANAGEMENT
This 850 Watt model from the P7 series is available at several different performance points, all of which meet the demands on the 80Plus Platinum certification and its minimum of 92% efficiency at medium load. The power supply is cooled by a large 140 mm Fluid Dynamic Bearing fan which, thanks to its automatica control, functions extremely quetly and in complete silence at loads below 60%. Loads of up to 80% require the fan to spin at low speeds of less than 500 RPM.
Particularly noteworthy is the RGB-LED lighting integrated into the fan, this can be controlled either via an optionally available Aerocool P7 hub or directly by motherboards supporting ASUS Aura, GIGABYTE RGB Fusion or MSI Mystic Light Sync.
Aerocool has opted for fully modular cable management: the motherboard and CPU are powered via 20-4-pin, 8-pin and 4+4 pin connectors. Six cables offering 6+2-pin connectors offer sufficient capacity for powering several high-performance graphics cards. Furthermore multiple connectors are provided including ten SATA connectors, six 4-pin Molex, one Molex-to-floppy adapter and a 4-pin RGB connector. In short: The Aerocool P7-850W is the ideal power supply for powerful gaming PCs everywhere!
Technical Details:
Fans: 140 mm (Fluid Dynamic Bearing)
Efficiency (80Plus Platinum certificate): minimum 92/90/89 % at 50/20/100 % load and 115 Volt input voltage, efficiency on German 230 Volt network slightly higher. Cybenetics ETA-B rating, LAMBDA-A++ noise rating
Operating Temperature: 0° to 50°
Performance: 850 W
+3,3V: 20 A
+5V: 20 A
+3,3V & +5V: 120 W
+12V: 54 A / 648 W
-12V: 0,5 A / 6 W
+5Vsb: 3 A / 15 W
Connectors (Modular):
1x 20+4-Pin (600 mm)
1x 8-Pin (700 mm)
1x 4+4-Pin (700 mm)
6x 6+2-Pin (600 mm)
10x SATA (600+ mm)
6x 4-Pin Molex (600+ mm)
1x Molex to Floppy Adapter (150 mm)
1x 4-Pin RGB (700 mm)
Reviews
There are no reviews yet.